CB Interface, Relay Contact Interface

© Copyright Rod Hughes Consulting Pty Ltd
Rod Hughes Consulting
General Web Site
 
Applications
Home
Innovations and
Solutions Home

A bit about
Rod Hughes
 Link to this page...

The URL in the browser address bar is volatile and may be broken at any time.

To obtain a link to this page, click the <<Share>> button top-right of the screen.

  

Note - if the navigation pane on the left of this window is not visible, click the 2-pane icon on the top bar



As the IEC 61850 system expands, there will be occasions where you need to interface physical I/O to the LAN and represent them as a specific Logical Node preferably with the correct Logical Node and its associated semantics in order to maximise the benefits in the engineering process.

Certainly there are a range of IEDs such as relays, meters, bay controllers etc that provide digital inputs and outputs.  In many cases however, these IED tools force the Systems Integrator to allocate these as GGIO and all the benefit of semantics is lost.

As an example without specifically promoting any one system as vendors like ABB, SEL ... all have similar Remote I/O units, this very effective unit known as the Cube Controller from SystemCORP provides the ability to nominate the Logical Node type associated with the physical input or output, thereby maintaining maximum benefits in the engineering process.  https://www.systemcorp.com.au/products/hardware/cube-controller/

It can be located within the control room or as part of the physical plant - eg the circuit breaker in order to bring back the CB position status or receive the trip/open/close messages to minimise wiring (note a single 52a and 52b contact together with a single trip/close connection requires a minimum of SIX WIRES - there are usually multiple 52a and 52b contacts and often duplicate trip wiring separated from the open/close control wiring which can be replaced by the SAS LAN )

It is also a useful solution to interfacing legacy electromechanical devices into the SAS LAN as shown below:



Use this permanent link to this page: https://rhconsult.tiny.us/2p84pv8w


Contact Me

Email Me

A phone call is nearly always welcome depending on the time of night wherever I am in the world.
Based in Adelaide UTC +9:30 hours e.g.

April-SeptemberNoon UK = 2030 Adelaide
October-March:Noon UK = 2230 Adelaide

  Office + 61 8 7127 6357
  Mobile + 61 419 845 253



Extra Notes:

Disclaimer
No Liability:
Rod Hughes Consulting Pty Ltd accepts no direct nor consequential liability in any manner whatsoever to any party whosoever who may rely on or reference the information contained in these pages.  Information contained in these pages is provided as general reference only without any specific relevance to any particular intended or actual reference to or use of this information. Any person or organisation making reference to or use of this information is at their sole responsibility under their own skill and judgement.

No Waiver, No Licence:
This page is protected by Copyright ©
Beyond referring to the web link of the material and w
hilst the information herein is accessible "via the web", Rod Hughes Consulting Pty Ltd grants no waiver of Copyright nor grants any licence to any extent  to any party in relation to this information for use, copy, storing or redistribution of this material in any form in whole or in part without written consent of Rod Hughes Consulting Pty Ltd.