Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

© Copyright Rod Hughes Consulting Pty Ltd
Rod Hughes Consulting
General Web Site
 
Applications
Home
Innovations and
Solutions Home

A bit about
Rod Hughes
 Link to this page...

The URL in the browser address bar is volatile and may be broken at any time.

To obtain a link to this page, click the <<Share>> button top-right of the screen.

  

Note - if the navigation pane on the left of this window is not visible, click the 2-pane icon on the top bar



I've seen questions such as why do we use 110 V d.c. auxiliary supply?

The question is also why not? 

Or is a different voltage better?


 

Here is a bit of background that might help.

In principle it all boils down to some historical choice by the asset owner at some time. Since everything since that decision has to be consistent, you generally are stuck with it for 'no good' reason

Some chose 110 V dc, some 125 V, others 250 V (which had lower current drain for same power so could handle long leads out to the yards better when there were large burden "clunker" trip coils (long leads means high resistance which means high voltage drop for large current) .

You also find 24 V, 32V, 48 V.

The lower the voltage, the more current for a particular power requirement, more current means more Ampere-hour capacity requirement which means bigger cells.

The 24 V generally comes associated with stand by back up generators which are started by 2 x 12 V dc "car batteries"

Once you get past the nominal voltage, you then have slight variations associated with the number of cells and also with the float voltage and the charge voltage

 

Contact Me

Skype: (ping even if showing offline)

Email Me

A phone call is nearly always welcome depending on the time of night wherever I am in the world.
Based in Adelaide UTC +9:30 hours e.g.

April-SeptemberNoon UK = 2030 Adelaide
October-March:Noon UK = 2230 Adelaide

  Office + 61 8 7127 6357
  Mobile + 61 419 845 253



Extra Notes:

Disclaimer
No Liability:
Rod Hughes Consulting Pty Ltd accepts no direct nor consequential liability in any manner whatsoever to any party whosoever who may rely on or reference the information contained in these pages.  Information contained in these pages is provided as general reference only without any specific relevance to any particular intended or actual reference to or use of this information. Any person or organisation making reference to or use of this information is at their sole responsibility under their own skill and judgement.

No Waiver, No Licence:
This page is protected by Copyright ©
Beyond referring to the web link of the material and w
hilst the information herein is accessible "via the web", Rod Hughes Consulting Pty Ltd grants no waiver of Copyright nor grants any licence to any extent  to any party in relation to this information for use, copy, storing or redistribution of this material in any form in whole or in part without written consent of Rod Hughes Consulting Pty Ltd.


  • No labels