Versions Compared

Old Version 36

changes.mady.by.user Rodney Hughes

Saved on

compared with

New Version 37

changes.mady.by.user Rodney Hughes

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Section


Column
Insert excerpt
FAQ:My Header
FAQ:My Header
nopaneltrue


...

Section


Column

IEC 61850 was issued in 2002-2004 with some 1700 pages across some nine parts

There are now some 47 70 identifiable Parts of the Standard, over 30 of which are published current versions - some Edition 2, some Edition 1 and some work in progress as Ed1 or Ed2 or Ed "n"

This gives a snapshot of the various Parts and status as mentioned by the IEC

The subsequent table provides a list of Parts of other Standards that are directly applicable to IEC 61850 applications or vice versa.

Note that just because a particular Part has been issued as a new Edition of an old Edition, this does not mean you don't need to reference the old Edition from time to time i.e.. your library of accessible Standards may need to have all Editions! 

Please check the IEC Webstore https://webstore.iec.ch/home to buy the latest (and old) versions - this list may be slightly out of date as it is only maintained from time to time.

Types of IEC documents

International Standards: A normative document, developed according to consensus procedures, which has been approved by the IEC National Committee members of the responsible committee in accordance with Part 1 of the ISO/IEC Directives.

Technical Specifications are often published when the subject under question is still under development or when insufficient consensus for approval of an International Standard is available. Technical Specifications approach International Standards in terms of detail and completeness, but have not yet passed through all approval stages either because consensus has not been reached or because standardization is seen to be premature.

Technical Reports are entirely informative in nature and shall not contain matter implying that they are normative.

ReferenceTypeCurrentOldTitle
IEC 61850-1TR20132003Introduction and overview
IEC 61850-1-2TR2020
Guideline on extending IEC 61850
IEC 61850-2TS20192003Glossary
IEC 61850-3IS20132002General requirements
IEC 61850-4IS20112002System and project management
IEC 61850-5IS20132003Communication requirements for functions and device models
IEC 61850-6IS20182009
2004		Configuration description language for communication in electrical substations related to IEDs
IEC 61850-6-1



IEC 61850-6-2


Configuration description language for extensions for human machine interfaces
IEC 61850-6-100


SCL Function Modelling for Substation Automation

IEC 61850-7-1 Ed2

AMD1

IEC 61850-7-1 Ed2.1

IS

IS

IS

2011

2020

2020

 2003Basic communication structure - Principles and models

IEC 61850-7-2 Ed2

AMD1

IEC 61850-7-2 Ed2.1

IS

IS

CSV

2019

2020

2020

2010,
2003

Basic information and communication structure - Abstract communication service interface (ACSI)

IEC 61850-7-3 Ed2

AMD1

IEC 61850-7-3 Ed2.1

IS

IS

CSV

2019

2020

2020

2010,
2003		Basic communication structure - Common data classes

IEC 61850-7-4 Ed2

AMD1

IEC 61850-7-4 Ed2.1

IS

IS

CSV

2019

2020

2020

2010,
2003		Basic communication structure - Compatible logical node classes and data object classes
IEC 61850-7-5


IEC 61850 modelling concepts
IEC 61850-7-6TS2019
Guideline for definition of Basic Application Profiles (BAPs) using IEC 61850
IEC 61850-7-7TS2018
Basic communication structure - Machine-processable format of IEC 61850-related data models for tools
IEC 61850-7-99



IEC 61850-7-410
20152012,
2007		Basic communication structure - Hydroelectric power plants - Communication for monitoring and control
IEC 61850-7-420IS2009
Basic communication structure - Distributed energy resources logical nodes
IEC 61850-7-499



IEC 61850-7-500TR2017
Basic information and communication structure - Use of logical nodes for modelling application functions and related concepts and guidelines for substations
IEC 61850-7-510TR2012
Hydroelectric power plants - Modelling concepts and guidelines
IEC 61850-7-520


DER - Modelling concepts and guidelines
IEC 61850-8-1IS20202011
2004		Specific communication service mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3
IEC 61850-8-2IS2018

Specific communication service mapping (SCSM) - Mapping to Extensible Messaging Presence Protocol (XMPP)

IEC 61850-9-1
withdrawn2003

Specific Communication Service Mapping (SCSM) - Sampled values over serial unidirectional multidrop point to point link

IEC 61850-9-2IS20202011
2004		Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3
"IEC 61850-9-2LE"UCAIUGrefer IEC 61860-92007,
2001

UCAIUG's Interim Guideline for application of IEC 61850-9-2 for CT/VT applications.

Replaced by IEC 61869-9

IEC 61850-9-3IS2016
Precision time protocol profile for power utility automation (IEEE 1588)
IEC 61850-10IS20122005Conformance testing
IEC 61850-10-3


Functional testing of IEC 61850 based systems
IEC 61850-80-1TS20162008Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104
IEC 61850-80-2TS

Mapping to DNP3 IEEE Standard 1815.1 

IEEE Standard for Exchanging Information Between Networks Implementing IEC 61850 and IEEE Std 1815(TM) [Distributed Network Protocol (DNP3)]

IEC 61850-80-3TR2015
Mapping to web protocols - Requirements and technical choices
IEC 61850-80-4TS2016
Translation from the COSEM object model (IEC 62056) to the IEC 61850 data model
IEC 61850-80-5TS

Guideline for mapping information between IEC 61850 and IEC 61158-6 (Modbus)
IEC 61850-80-6


Using IEC 61850 for communication between substations and control centres
IEC 61850-80-7


Communication services and data model to support IEC 61850 system management
IEC 61850-90-1TR2010
Use of IEC 61850 for the communication between substations
IEC 61850-90-2TR2016
Using IEC 61850 for communication between substations and control centres
IEC 61850-90-3TR2016
Using IEC 61850 for condition monitoring diagnosis and analysis
IEC 61850-90-4TR20202013Network engineering guidelines
IEC 61850-90-6TR

Use of IEC 61850 for Distribution Automation Systems
IEC 61850-90-5TR2012
Use of IEC 61850 to transmit synchrophasor information according to IEEE C37.118
IEC 61850-90-6TR2018
Use of IEC 61850 for Distribution Automation Systems
IEC 61850-90-7TR2013
Object models for power converters in distributed energy resources (DER) systems
IEC 61850-90-8TR2016
Object model for E-mobility
IEC 61850-90-9TR2020
Object models for electrical storage systems
IEC 61850-90-10TR2017
Models for scheduling
IEC 61850-90-11TR2020
Methodologies for modelling of logics for IEC 61850 based applications
IEC 61850-90-12TR20202015Wide area network engineering guidelines
IEC 61850-90-13TR

Deterministic networking technologies
IEC 61850-90-14TR

Using IEC 61850 for FACTS and power conversion data modelling
IEC 61850-90-15TR

DER Grid Integration
IEC 61850-90-16TR2021
Requirements of system management for Smart Energy Automation
IEC 61850-90-17TR2017
Using IEC 61850 to transmit power quality data
IEC 61850-90-18


Modelling alarm handling for IEC 61850
IEC 61850-90-19TR

Applying Role Based Access Control (RBAC) to IEC 61850
IEC 61850-90-20TR

Guideline for redundant IEDs with IEC 61850
IEC 61850-90-21


Use of IEC 61850 for travelling wave fault location system
IEC 61850-90-22TR

SCD based substation network auto-routing with visualization and supervision support

IEC 61850-90-23


Model extensions to IEC 61850 to support microgrids
IEC 61850-90-24


Mapping of IEC 62351-7 on IEC 61850
IEC 61850-90-25


Model update based on Users feedback
IEC 61850-90-26


IED Specification Description
IEC 61850-90-27


Use of IEC 61850 for thermal energy systems connected to electric power grid

IEC 61850-99-99

TR

Communication network in hydropower plants


ReferenceTypeCurrentOldTitle
IEC 61400-25-1IS20172006Communications for monitoring and control of wind power plants – Overall description of principles and models
IEC 61400-25-2IS20152006Communications for monitoring and control of wind power plants - Information models
IEC 61400-25-3

IS

20152006Communications for monitoring and control of wind power plants - Information exchange models
IEC 61400-25-4IS20162008Communications for monitoring and control of wind power plants - Mapping to communication profile
IEC 61400-25-5IS20172006Communications for monitoring and control of wind power plants - Compliance testing
IEC 61400-25-6IS2016
Communications for monitoring and control of wind power plants - Logical node classes and data classes for condition monitoring
IEC 61869-6
2016
Additional general requirements for low-power instrument transformers
IEC 61869-9
2016
Digital interface for instrument transformers
(Replaces interim guideline "UCAIUG IEC 61850-9-2LE")
IEC 61869-13


Stand Alone merging Unit
IEC 61968-1


Application integration at electric utilities – System interfaces for distribution management Interface architecture and general recommendations
IEC 61968-2


Application integration at electric utilities – System interfaces for distribution management - Glossary
IEC 61968-3


Application integration at electric utilities – System interfaces for distribution management - Interface for network operation
IEC 61968-4


Application integration at electric utilities – System interfaces for distribution management - Interface for records and asset management
IEC 61968-5


Application integration at electric utilities – System interfaces for distribution management - Interface standard for operational planning and optimisation
IEC 61968-6


Application integration at electric utilities – System interfaces for distribution management - Interface for maintenance and construction
IEC 61968-7


Application integration at electric utilities – System interfaces for distribution management - Interface standard for network extension planning
IEC 61968-8


Application integration at electric utilities – System interfaces for distribution management - Interface standard for customer support
IEC 61968-9


Application integration at electric utilities – System interfaces for distribution management - Interface for meter reading and control
IEC 61968-11


Application integration at electric utilities – System interfaces for distribution management - Common information model (CIM) extensions for distribution
IEC 61968-13


Application integration at electric utilities – System interfaces for distribution management - CIM RDF model exchange format for distribution
IEC 61968-100


Ipplication integration at electric utilities – System interfaces for distribution management - Implementation profiles
IEC 62271-3
20152006High-voltage switchgear and controlgear:  Digital interfaces based on IEC 61850
IEC 62351-1TS2007
Power systems management and associated information exchange - Data and communications security:  Communication network and system security - Introduction to security issues
IEC 62351-6TS2007
Power systems management and associated information exchange - Data and communications security:  Security for IEC 61850
IEC 62357-1TR20162012Power systems management and associated information exchange:  Reference architecture
IEC 62357-200TR2015
Power systems management and associated information exchange:  Guidelines for migration from Internet Protocol version 4 (IPv4) to Internet Protocol version 6 (IPv6)
IEC 62361-2
2013
Power systems management and associated information exchange - Interoperability in the long term: End to end quality codes for supervisory control and data acquisition (SCADA)
IEC 62689-100TR2016
Current and voltage sensors or detectors, to be used for fault passage indication purposes:  Requirements and proposals for the IEC 61850 series data model extensions to support fault passage indicators applications





Column
width2%


Column
width18%

Insert excerpt
FAQ:Course contact
FAQ:Course contact

Insert excerpt
FAQ:Contact Me
FAQ:Contact Me
nopaneltrue

Extra Notes:


...